PermaMop® Asphalt

Versatile and Long-Lasting

Low-fuming PermaMop® modified roofing asphalt is specially engineered to provide exceptional durability. This makes it a great choice for projects in extreme weather areas, whether it's heat, cold or moisture. In laboratory testing, PermMop®asphalt withstands up to 193 weather cycles compared to only 60 weather cycles of other asphalts. That's a minimum of 150% longer than standard asphalt, making PermaMop® a great choice for all weather conditions. permamop.jpg

    Every shipment of PermaMop® asphalt:
  • Offers consistent high flash point material needed to apply product safely at the EVT. Flash point typically exceeds 500 
  • Is produced at four different locations, making it available from coast to coast 
  • Includes packaging that clearly identifies the Trumbull brand in addition to important technical information, including product EVT information and flash point



permamop.jpg How can I get PermaMop® Modified Asphalt?

Our asphalt contact locator can help you find a distributor in your area.





Features & Benefits Technical Documents Physical Characteristics
FeaturesBenefits
Meets ASTM D312PermaMop® meets or exceeds ASTM D312 specifications except solubility.
Consistent high flash materialProper temperature range needed to apply product safely at the EVT; flash points typically 50ºF to 75ºF higher than the 500ºF minimum
4 producing plantsConvenient, accessible availability from coast to coast
EVT shown on each carton and bill of lading for bulk shipmentsAssures proper adhesion, waterproofing and application rate
Printed cartonsClearly identifies manufacturers, type, flash point, EVT, production location and production date
Features & Benefits
FeaturesBenefits
Meets ASTM D312PermaMop® meets or exceeds ASTM D312 specifications except solubility.
Consistent high flash materialProper temperature range needed to apply product safely at the EVT; flash points typically 50ºF to 75ºF higher than the 500ºF minimum
4 producing plantsConvenient, accessible availability from coast to coast
EVT shown on each carton and bill of lading for bulk shipmentsAssures proper adhesion, waterproofing and application rate
Printed cartonsClearly identifies manufacturers, type, flash point, EVT, production location and production date
Technical Documents
Physical Characteristics

Typical Physical Characteristics for PermaMop® Modified Asphalt


  PermaMop®
Softening Point (°F) 215-235
Flash Point (°F) 525
Penetration, units, dmm:       
  @32°F 7
  @77°F 18
Ductility @77°F, cm 7.0
Solubility in Trichoroethylene % 97.5
Typical Application Temperature For Hand Mopping
EVT @125 CPS +/- 25°F
For Machine Spreader
EVT @75 CPS +/- 25°F 		375

395

Physical Requirements - ASTM D312-00


    Type I Type II Type III Type IV Test Methods
    Min. Max. Min. Max. Min. Max. Min. Max.  
Softening Point (°F)   135 151 158 176 185 205 210 225 ASTM D36
Flash Point (°F)   500 - 500 - 500 - 500 - ASTM D92
Penetration, Units, dmm: @32°F
@77°F
@115°F 		3
18
90 		-
60
180 		6
18
- 		-
40
100 		6
15
- 		-
35
90 		6
12
- 		-
25
75 		ASTM D5
Ductility @77°F   10.0 - 3.0 - 2.5 - 1.5 - ASTM D113
Solubility in Trichoroethylene %   99 - 99 - 99 - 99 - ASTM D2042
Asphalts shall be homogenous and free of water and shall conform to these physical properties.