Technical Characteristics (Single-End Roving)
The following data was generated using Anhydride/Epon 828 resin.
|Inter-Laminar Shear Strength NOL Ring:
ASTM D 2344
||Dry Shear Strength (MPA)
||Dry Shear Strength (PSI)
||Shear Strength Retention 72 hr Boil (%)
|158B 450 Yield
|158B 250 Yield
Availability & Packaging
Not all Tex available in all regions.
||1100, 1200, 2100
Rovings are available in a single-end internal-pull package. All individual packages are wrapped with Tack-Pak™ packaging to aid package run-out and transfer. Pallets are available in bulk or Creel-Pak™ pallet packaging format, depending on region. More information is available from Owens Corning Customer Service and Sales.
Each individual package is labeled with information including product name, Tex/yield, producing plant, and production date.
It is recommended to store glass fiber products in a cool, dry area. The glass fiber products must remain in their original packaging material until the point of usage; the product should be stored in the workshop, within its original packaging 48 hours prior to its utilization to allow it to reach the workshop temperature condition and prevent condensation, especially during cold season. The packaging is not waterproof. Be sure to protect the product from the weather and other sources of water. When stored properly, there is no known shelf life to the product, but retesting is advised after three years from the initial production date to ensure optimum performance.