Chopped Strand Mat

M123

FOR A WIDE RANGE OF APPLICATIONS

VERSATILITY AND LOW RESIN CONSUMPTION

M123 chopped strand mat represents a versatile solution for a wide range of applications, including open and closed mold, continuous and discontinuous lamination, filament winding, and other processes.

Specifications and Literature

M123 Product Data Sheet PDF | 594 KB
Search Safety Data Sheets (SDS/MSDS)

Performance Attributes

ENHANCED PERFORMANCE
VERSATILE & CUSTOMIZABLE
ENHANCED SERVICE LIFE
  • Enhanced Performance

    • High tensile strength makes the product suitable for large parts, filament winding, or lamination process. <br> <br> • Fast wet -out and impregnation yields low resin consumption.

  • Versatile & Customizable

    • Flexibility for use with open/closed mold, filament winding, lamination, and other processes. <br> <br> • Customizable to best meet customer needs in mat weight, width, and packaging.

  • Enhanced Service Life

    • Compared to standard E-glass, Advantex® glass helps with enhanced service life in applications facing corrosion.

APPLICATIONS

M123 is designed with the versatility to be used in open and closed mold, continuous/discontinuous lamination, filament winding, and other processes for the manufacturer of automotive, heavy truck, RV parts, and other products.

APPLICATIONS

Technical Information

Availability

M123 is available in Europe. Additional weights and widths are available upon request by contacting your Owens Corning representative.

NOMINAL MAT WEIGHT (G/M2) ROLL WIDTH (CM)
225 - 300 - 450 - 600 125

Packaging & Labeling

Each roll is wound on a 101.6mm internal diameter cardboard tube and fully enclosed in Cling-Pak™ wrap. Rolls are positioned vertically on each pallet, banded with tape and Cling-Pak™ wrapped for stability and protection.

Each roll bears a label detailing the product description, product code, nominal weight, roll width, roll number, and date of manufacture.

NOMINAL MAT WIDTH (CM) ROLL DIAMETER (CM) ROLLS PER PALLET PALLET SIZE (CM)
125 28.5 16 120 x 120
125 39 9 120 x 120


Storage

Unless otherwise specified, it is recommended to store glass fiber products in a cool, dry area. Ideal conditions are at a temperature between 10°C and 35°C and a relative humidity between 35% and 85%. The glass fiber products must remain in their original packaging material until the point of usage. If the storage temperature is below 15°C, it is recommended that the product be stored in the workshop, within its original packaging, at least 24 hours prior to use to help prevent condensation. The packaging is not waterproof. Be sure to protect the product from the weather and other sources of water. When stored properly, there is no known shelf life to the product, and retesting is advised after three years from the initial production date to ensure optimum performance.

Applications

Talk to an Expert

Ray Arai

Contact Ray