ME1510 represents a compelling solution for structural applications requiring high mechanical properties. This multi-end roving product increases physical properties – enabling vehicle light weighting, increased fuel efficiency and lower CO2 emissions.
TALK TO AN EXPERT
EXCELLENT PROCESSABILITY
OUTSTANDING MECHANICAL PROPERTIES
ENHANCED SERVICE LIFE
NO ODOR
Due to excellent wettability in epoxy and phenolic matrices, very high glass content is achievable, enabling excellent processability while compounding.
Superior strength and flexural modulus enable light weighting in vehicles to increase fuel efficiency, lower CO2 emissions and increase range in electric vehicles.
Advantex® glass helps fight corrosion, enhancing service life compared to standard E-glass.
Compatible with phenolic resins used in fire resistance applications such as electric vehicles.
Epoxy resin system meets low odor requirements in vehicles.
ME1510 is designed to provide optimal performance in Sheet Molding Compound (SMC) applications including: automotive structural parts, electric vehicles, and critical industrial applications that require higher mechanical properties such as oil and gas exploration.
| Doff Characteristics | ||||
|---|---|---|---|---|
| Product | Diameter (mm) | Height (mm) | Nominal Weight (kg) | |
| Internal | External | |||
| ME1510 2400 and 4800 TEX | 76 | 285 to 290 | 254 | 20.5 |
| Linear Weight Of Roving | Loss On Ignition (%) iso 1887: 1995 | Moisture Content (%) iso 3344: 1997 |
|---|---|---|
| 2400 and 4800 TEX 207 and 103 Yeild | 0.7 | ≤ 0.18 |
The Performax® SE4849 roving has been designed for hot-melt compounding process, and for pultrusion process to manufacture unidirectional continuous fiber reinforced thermoplastic (CFRT) tapes.
The Performax® SE4850 roving has been designed for direct compounding DLFT applications requiring intricate function integration, particularly in automotive (structural and semi-structural challenging complex parts) and overall system cost reduction.
The Advantex® ME1975 glass fiber multi-end roving is designed for use in sheet molding compound Class-A applications in automotive and transportation markets.
