HIGH FLOW PERFORMANCE
ME1958 multi-end roving represents a versatile solution for the manufacture of pigmented sheet molding compounds and in molds where high flow is required.TALK TO AN EXPERT
Designed for excellent processing at various line speeds, ME1958 features easy unwinding and chopping, flat lay-down, and uniform dispersion with low fuzz and static.
Increased wet-out allows higher glass loading due to excellent wet-through and impregnation. This can be leveraged to further enhance the mechanical strength and stiffness of the composite part. <br> <br> Excellent fiber distribution for smooth surface aspect and consistent thickness of the laminate with minimal color shift in filled pastels.
Advantex® glass helps fight corrosion, enhancing service life compared to standard E-glass.
|LINEAR WEIGHT OF ROVING (TEX)(G/KG) ISO 1889: 1987||YIELDS (YDS/LB)||LOSS ON IGNITION (%) ISO 1887: 1995|
|PRODUCT||DOFF DESCRIPTION OUTSIDE (MM, IN)||HEIGHT (MM,IN)||NET WEIGHT (KG, LB)||MANUFACTURING REGION|
Each pallet can be packaged in bulk or Creel-Pak™ packaging format. Pallets are stretch-wrapped for load stability and for protection during transport. All individual packages are wrapped with Tack-Pak™ packaging to aid package run-out and transfer. More information is available in the Customer Acceptance Standards.
|PRODUCT||PALLET DIM. LxW (IN)||LAYERS PER PALLET||DOFFS PER LAYER||TOTAL NUMBER OF DOFFS||NUMBER OF ENDS|
|ME-1958-4500 4023 TP AS8 4E CPL VO||53 x 46||4||12||48||4 ERO tails on Long Side|
|ME-1958-4500 4023 12E AS8 TP CPS TLX||46 x 53||4||12||48||12 ERO tails on Short Side|
|ME-1958-4500 4023 12E AS8 TP CPL TLX||53 x 46||4||12||48||12 ERO tails on Long Side|
|ME-1958-4500 4093 12ERO AS8 CPS ADV TLX||38 x 51||4||12||48||12 ERO tails on Short Side|
Each doff has a self-adhesive identification label showing the product description, net weight, and production date. Each pallet has at least two identification labels detailing the product reference, pallet net and gross weights, production date, and pallet production code.
It is recommended to store glass fiber products in a cool, dry area. The glass fiber products must remain in their original packaging material until the point of usage; the product should be stored in the workshop, within its original packaging, 48 hours prior to its utilization, to allow it to reach the workshop temperature condition and prevent condensation, especially during cold season. The packaging is not waterproof. Be sure to protect the product from the weather and other sources of water. When stored properly, there is no known shelf life to the product, but retesting is advised after two years from the initial production date to insure optimum performance.
ME1958 is available in North America