SE4805 single-end Type 30™ roving is specifically designed as a compelling solution for Compounders seeking increased productivity through improved processing and handling characteristics, and excellent compatibility in Polypropylene LFT applications.
TALK TO AN EXPERT
IMPROVED MANUFACTURING ECONOMICS
MULTI-PROCESS CAMPATIBLE
MECHANICAL PERFORMANCE
EXCELLENT IMPREGNATION & DISPERSION
Dependable internal and external unwinding process for less downtime. <br> Reduction in fuzz generation relative to competitive reinforcements for easier processing and less downtime for clean-up.
Suitable for LFT-G, D-LFT and CFRT processes, pellet manufacturing and choppable to desired length.
Optimal adhesion to the Polyolefin resin matrix provides excellent dry-as-molded mechanical properties.
All processes show excellent dispersion within the final parts.
Advantex® glass helps fight corrosion, enhancing service life compared to standard E-glass.
| TEX | FILAMENT DIAMETER (μ) | LOSS ON IGNITION (%) | MOISTURE (%MAX) | MANUFACTURING REGION |
|---|---|---|---|---|
| 2400 | 17 | 0.35 | 0.05 | Asia Pacific |
| 1200 | 17 | 0.35 | 0.05 | Asia Pacific |
| 900 | 15 | 0.35 | 0.05 | Asia Pacific |
| PACKAGING | PALLET HEIGHT (CM) | PALLET LENGTH (CM) | PALLET WIDTH (CM) | PALLET WEIGHT (NET, KG) | PACKAGES PER PALLET | NUMBER OF LAYERS |
|---|---|---|---|---|---|---|
| No Tube | ~125 | 115 | 115 | ~1200 | 64 | 4 |
| No Tube | ~97 | 115 | 115 | ~900 | 48 | 3 |
| Thicker Tube | ~100 | 115 | 115 | ~900 | 48 | 3 |
| PACKAGE HEIGHT (CM) | PACKAGE OUTSIDE DIAMETER (CM) | PACKAGE INSIDE DIAMETER (CM) | PALLET WEIGHT (KG, WEIGHT% IN PALLET) | |||
|---|---|---|---|---|---|---|
| <28.0 | <30.0 | >16.2 (No Tube) | ~16.2 (Thick tube) | 16~20 (70%) | 10~16 (25%) | 5~10 (5%) |
Each individual package is labeled with information including: product name, tex/yield, producing plant and production date.
Unless otherwise specified, it is recommended to store glass fiber products in a cool, dry area. The glass fiber products must remain in their original packaging material until the point of usage. The product should be stored in the workshop in its original packaging for 48 hours prior to its utilization, to allow it to reach the workshop temperature condition and prevent condensation, especially during the cold season. The packaging is not waterproof. Be sure to protect the product from the weather and other sources of water. When stored properly, there is no known shelf life to the product, but retesting is advised after three years from the initial production date to insure optimum performance.
