SE8380 Type 30® is specifically designed with fast wet-out, good processing, and corrosion resistance, to maximize strand integrity in applications where low smoke and excellent fire retardance are required.
TALK TO AN EXPERT
EXCELLENT PROCESSING
CORROSION RESISTANT
INCREASED PRODUCTIVITY
Fast wet-out resulting in no catenary for improved run-outs
Reduced downtime, smoother parts and improved machine efficiencies
Excellent corrosion resistance with Advantex® Glass compared to standard E-glass: providing longer service life in applications facing corrosion.
Pultrusion applications requiring phenolic resin, where low smoke and fire retardance are required, as well as, various marine applications.
| Property | Linear Density* | % Organic Solids Nominal | Filament Diameter Micron** | |
|---|---|---|---|---|
| Tex (GM/KM) | Yield (YD/LB) | |||
| SE 8380 113 | 4400 | 113 | 0.55 | 23 |
*Linear densities specified = bare glass + sizing. Test Procedure: W-07Da is an Owens-Corning test procedure. Copies are available on request.
**The data in the following section is provided for information purposes only and does not constitute a specification. Test Procedure: Filament Diameter is calculated.
This product is available in North America and Latin America
Rovings are available in a single-end internal-pull package. Each pallet weighs about 1 ton and can be packaged in bulk or Creel-Pak® packaging format. Pallets are stretch-wrapped for load stability and for protection during transport. All packages are wrapped with Tack-Pak® packaging to aid package run-out and transfer. More information is available in the Customer Acceptance Standards.
Unless otherwise specified, it is recommended to store glass fiber products in a cool, dry area. The packaging is not waterproof. Be sure to protect the product from the weather and other sources of water. The product should be stored in the workshop, within its original packaging, 48 hours prior to its utilization. It is recommended that SE8380 Type 30® Single-end Roving be used in resin within 18 months for manufacture. The best storage conditions are temperatures between 7°C and 33°C and humidity 80% or less.
PulStrand® 4100 Type 30® is a single end roving designed specifically for pultrusion, offering fast wetting, excellent processing and excellent laminate performance in major resin systems.
Global Product Manager, Chopped Strands & Global Product Engineering, Thermoplastics
Contact Corey
