Type 30™ Single-end Roving

SE8400

For Pultruded High Voltage Electrical Insulator Applications
TALK TO AN EXPERT

ELECTRICAL INSULATOR WITH ACID RESISTANCE

SE8400 Type 30™ continuous single-end roving is specifically designed for pultrusion processing in applications requiring high electrical resistance. Made with Advantex® corrosion resistant E-CR glass by Owens Corning. Compatible with polyester, vinyl ester and epoxy resins.

TALK TO AN EXPERT

Specifications and Literature

Creel-Pak Packaging Overview PDF | 1.2 MB Creel-Pak Packaging Overview PDF | 1.2 MB
Search for Material Safety Data (SDS, SUIS)

Performance Attributes

EFFICIENT PROCESSING
GOOD MECHANICAL PROPERTIES
ADVANCED SERVICE LIFE
  • Efficient Processing

    Better wet-out in polyester, vinyl ester, and epoxy resin, offering fast processing and good glass-to-resin bonding, resulting in optimized part production. <br> Good wet-out and resin bonding results in excellent visual appearance of parts produced.

  • Good Mechanical Properties

    Low seed glass results in excellent dielectric properties which are ideal for applications requiring high electrical resistance.

  • Advanced Service Life

    Advantex® corrosion resistant glass fiber combined with low seed glass is ideal for long-term electrical, physical, and acid resistance, reducing the potential for costly brittle fracture failures in the field.

  • Applications

    Specifically designed for pultruding high voltage electrical insulators, SE8400 is ideal for high voltage electrical applications due to the unique combination of Advantex® and low seed glass.

Technical Information

Technical Characteristics (Nominal Values)


Strand Tensiles: ASTM D 2343 AVG. E-701 Polyester Resin % Glass AVG. DER 331 Epoxy Resin % Glass
Tensile Strength, psi (Mpa) 353,900 (2440) 58.8 338,800 (2336) 54.5
NOL Ring Shear ASTM D 2344 Avg. E-701 Polyester Resin % Glass Avg. DER 331 Epoxy Resin % Glass
Dry Shear Strength, psi (Mpa) 9,260 (63.8) 79.8 9,445 (65.1) 77.1
Wet Shear Strength, psi (Mpa) 8,356 (57.6) 79.8 9,030 (62.3) 77.1
% Retention 90.2 95.6
Wet data represents samples boiled in water for 72 hours.

Availability & Packaging

Tex Yield Manufacturing Region
4400 113 North America
Rovings are available in a single-end internal-pull package. Each pallet weighs about 1 ton and can be packaged in bulk or Creel-Pak™ packaging format. Pallets are stretch-wrapped for load stability and for protection during transport. All individual packages are wrapped with Tack-Pak™ packaging to aid package run-out and transfer. More information is available in the Customer Acceptance Standards.

Labeling

Each individual package is labeled with information including: product name, tex/yield, producing plant, and production date.

Storage

Unless otherwise specified, it is recommended to store glass fiber products in a cool, dry area. The glass fiber products must remain in their original packaging material until the point of usage. The product should be stored in the workshop in its original packaging for 48 hours prior to its utilization to allow it to reach the workshop temperature condition and prevent condensation, especially during the cold season. The packaging is not waterproof. Be sure to protect the product from the weather and other sources of water.

 

Regional Availability

SE8400 is available in North America.


Applications

Talk to an Expert

Patrick Haller

Product Leader

Contact Patrick