Product Information

Roll size	10 sq.
Length	250 ft.
Width	48 in.
Weight	36 lb. ⁹
Coverage (with 3-in. overlap)	937 sq. ft.
Exposed Color	Light grey
Surface Construction	Coated textured poly

1. Limited to single layer application.

2. The surface burning characteristics of these products have been determined in accordance with ASTM E84. This standard should be used to measure and describe the properties of materials, products or assemblies in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire risk of materials, products or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire risk assessment which takes into account all of the factors which are pertinent to an assessment of the fire hazard of a particular end use. Values are reported to the nearest 5 rating.

3. Preproduction qualification testing complete and on file. Chemical analysis of each production lot required for total conformance.

4. The surface burning characteristics of these products have been determined in accordance with ASTM E84, UL 723, and CAN/ULC-S102. These standards should be used to measure and describe the properties of materials, products, or assemblies in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire risk of materials, products or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire risk assessment, which takes into account all of the factors, which are pertinent to an assessment of the fire hazard of a particular end use. Values are reported to the nearest 5 rating.

5. Preproduction qualification testing complete and on file. Chemical analysis of each production lot required for total conformance.

6. The surface burning characteristics of these products have been determined in accordance with UL 723, ASTM E84 or CAN/ULC-S102. This standard should be used to measure and describe the properties of materials, products or assemblies in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire risk of materials, products or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire risk assessment which takes into account all of the factors which are pertinent to an assessment of the fire hazard of a particular end use. Values are reported to the nearest 5 rating.

7. All values are approximate.

8. The surface burning characteristics of these products have been determined in accordance with UL723, ASTM E84, or CAN/ULC-S102. These standards should be used to measure and describe the properties of materials, products, or assemblies in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire risk of materials, products or assemblies under actual fire conditions. However, the results of these tests may be used as elements of a fire risk assessment that takes into account all of the factors that are pertinent to an assessment of the fire hazard of a particular end use. Values are reported to the nearest 5 rating.

9. Includes core weight

* Special application required for extended exposure. See installation instructions.

** See actual warranty for complete details, limitations and requirements.

^ Excludes non–Owens Corning™ roofing products such as flashing, fasteners and wood decking.

Underlayment is tested as part of a roof assembly that includes wood decking, underlayment and asphalt roof shingles.

Applies for all areas that recognize Miami-Dade Product Control Section.