HVAC Fiberglass Insulation

7 Products

SOFTR® Duct Wrap FRK

SOFTR Duct Wrap is a blanket of glass fiber insulation factory-laminated to FRK vapor retarder facing. It is used for external insulation of commercial and residential heating, air-conditioning and dual-temperature ducts operating at temperatures from 40°F (4°C) to 250°F (121°C).

  • R-Value Ranges: 4.2-8.3
  • Thickness Ranges: 1.5-3"

QuietR® Duct Board

Owens Corning QuietR Duct Board is a rigid, resin bonded fibrous glass board that may be used to fabricate components for indoor commercial and residential duct systems.

  • R-Value Ranges: 4.3-8.7
  • Thickness Ranges: 1-2"

QuietR® Rotary Duct Liner

Owens Corning QuietR Rotary Duct Liner absorbs noise within sheet metal ducts, and contributes to indoor comfort by lowering heat loss or gain through duct walls.

  • R-Value Ranges: 2.2-8
  • Thickness Ranges: 0.5-2"

QuietR® Duct Liner Board

Owens Corning QuietR Duct Liner Board is a bonded board of glass fibers designed to be installed inside sheet metal ductwork or plenums with metal fasteners and adhesives. It is ideal for use in large ducts and plenums where air velocities do not exceed 6,000fpm (30.5 m/s).

  • R-Value Ranges: 4.3-8.7
  • Thickness Ranges: 1-2"

QuietR® Spiral Duct Liner

Owens Corning QuietR Spiral Duct Liner fits your specific duct size, compression at grooves and joints is kept to a minimum, providing consistent thermal performance throughout the entire duct system.

  • R-Value Ranges: 4.3-8.7
  • Thickness Ranges: 1-2"

EcoTouch® Insulation for Flexible Duct

Owens Corning EcoTouch Insulation for Flexible Duct is a lightweight, flexible, resilient thermal and acoustical insulation made of inorganic glass fibers bonded with a thermosetting resin.

  • R-Value Ranges: 4.2-8
  • Thickness Ranges: 1.25-2.38"

QuietR® Duct Liner HD-Roll

Owens Corning QuietR Duct Liner HD-Roll is a high density roll designed to be installed inside sheet metal ductwork or plenums with metal fasteners and adhesives. It is ideal for use in large ducts and plenums where air velocities do not exceed 6,000fpm (30.5 m/s).

  • R-Value Ranges: 4.3
  • Thickness Ranges: 1"