Roofing Basics: The Anatomy of a Roof
I think I need a new roof. Now what? First of all, don’t worry. Owens Corning™ Roofing is here to help. Our entire Roofing Basics section is designed to give you the information you need.
While replacing a roof can be a big, important decision, it also helps protect your biggest investment-your home-and it gives you the chance to start fresh with a new exterior look. Getting the color and shape of shingle you always wanted is a great way to express your individual personality and add real value. Plus, if you have a leak, ignoring it can only get worse and could result in interior damage or even mold or roof deck rot.
Let’s get started. Click on the spots below to learn more about the anatomy of the roof.
Ridge vent
An exhaust vent that runs horizontally along the peak of the roof allowing warm,
humid air to escape from the attic.
Learn More
Ridge.
An intersection of two roof planes forming a horizontal peak.
Flashing
Waterproofing construction used at intersections of different planes or at openings
in the roof.
Valley
The intersection of two sloping roofs joining at an angle to provide water runoff.
Deck
The structural base for the roof, usually made of wood or plywood.
Gable Roof
Gable
The triangular section of the outer wall at the peak of the roof. Also a type of
roof.
Underlayment
A layer of protective material between the deck and the shingles.
Learn More
Metal drip edge
A narrow strip of noncorrosive metal used at the rake to facilitate water runoff.
Ridge
An intersection of two roof planes forming a horizontal peak.
Ice & Water Barrier
.
A self-adhesive waterproofing membrane used along eaves and valleys to protect these
sensitive areas against ice damage and wind-driven rain.Learn
More
Eave
The lower border of the roof that overhangs the wall.
Hip
The intersection of two roof planes that meet to form a sloping ridge running from
the peak to the eave.
Undereave vent
Intake vents located under the eaves of the roof that help draw cool dry air into
the attic.
Learn More
An Owens Corning™ Total Protection Roofing System™§
You'll notice that a roof is much more than just shingles-it's a complete system of integrated components and layers all working together to protect the home. To see more information on the Owens Corning™ Roofing products that make up the Total Protection Roofing System™§, click here .
1.Deck. The structural base for the roof, usually made of wood or plywood.
2.Dormer. A structure containing a window that projects vertically through the slope in the roof.
3.Eave. The lower border of the roof that overhangs the wall.
4.Exposure. The part of each shingle that is exposed to the weather.
5.Flashing. Waterproofing construction used at intersections of different planes or at openings in the roof.
6.Gable. The triangular section of the outer wall at the peak of the roof. Also a type of roof.
7.Hip. The intersection of two roof planes that meet to form a sloping ridge running from the peak to the eave.
8.Ice and water barrier. A self-adhesive waterproofing membrane used along eaves and valleys to protect these sensitive areas against ice damage and wind-driven rain.
9.Laminated or three-dimensional shingles. Shingles containing more than one layer of tabs to add dimension and durability.
10.Metal drip edge. A narrow strip of noncorrosive metal used at the rake to facilitate water runoff.
11.Off-ridge exhaust vent. Individual exhaust vents usually located on the upper half of the roof that allow warm, humid air to escape from the attic. May be round, square or resemble a pipe or stack.
12.Rake. The outer edge of the roof from the eave to the ridge.
13.Ridge. An intersection of two roof planes forming a horizontal peak.
14.Ridge vent. An exhaust vent that runs horizontally along the peak of the roof allowing warm, humid air to escape from the attic.
15.Square. One "square" of roofing material equals 100 square feet of roofing area. Many roofing materials are bought by the square.
16.Three-tab shingles. Strip shingles containing three exposed tabs that are evenly spaced across the width of each shingle.
17.Undereave vent. Intake vents located under the eaves of the roof that help draw cool dry air into the attic.
18.Underlayment. A layer of protective material between the deck and the shingles.
19.Valley The intersection of two sloping roofs joining at an angle to provide water runoff.
§Excludes non-Owens Corning™ Roofing Products such as flashing, fasteners and wood decking.