XPS Insulation

FOAMULAR® XPS Pipe Insulation Fabrication Billets

EXTRUDED POLYSTYRENE FABRICATION BILLETS

Used as low-temperature pipe and equipment insulation, FOAMULAR® XPS Pipe Insulation is ideal for various cold service applications - including ammonia/refrigeration, and food and beverage service processing. Contact us for distributor / fabricator locations.

FOAMULAR XPS Pipe Fabrication Billets Data Sheet PDF | 756 KB

EXTRUDED POLYSTYRENE FABRICATION BILLETS

Used as low-temperature pipe and equipment insulation, FOAMULAR® XPS Pipe Insulation is ideal for various cold service applications - including ammonia/refrigeration, and food and beverage service processing. Contact us for distributor / fabricator locations.

FOAMULAR XPS Pipe Fabrication Billets Data Sheet PDF?V=1570076153000 | 756 KB

Specifications and Literature

Product Features

APPLICATIONS • Ammonia piping and equipment • Refrigeration piping and equipment • Food and beverage service processing • Other cold service applications. FEATURES: • Low water permeability • Exceptional thermal efficiency • Low moisture absorption • Available in a wide range of formats • Compatible sealants, adhesives and jackets available • Compatible with stainless steel

Resources

Technical Information

Physical Properties

Property Test Method 2 Value
Thermal Conductivity, maximum,
Btu•in/ft2•hr•°F
180 days @ 75°F mean temperature
3, 4
ASTM C518

0.200 (0.029)
Compressive Strength, minimum, psi (kPa) 3, 5 ASTM D1621 25 (173)
Water Absorption, maximum, % by volume 3, 6 ASTM C272 .15
Water Vapor Permeance maximum, perm (ng/P•s•m2) 3, 7 ASTM E96 1.1
Dimensional Stability, % linear change 3 ASTM D2126 2.0
Flame Spread 3, 8, 9 ASTM E84 10
Smoke Developed 3, 8, 9 ASTM E84 175
Service Temperature, maximum, В°F (В°C) -320 to 165 (-196 to 74)
Linear Coefficient of Thermal Expansion, in/in•°F 3 ASTM E228 3.5 x 10-5 (6.3 x 10-5)

1. Includes core weight.

2. Sample modified as required to meet applicable test method.

3. XPS foam core values meet ASTM C578 TYPE IV.

4. k means the apparent thermal conductivity. The lower the value, the greater the insulation power.

5. Values at yield or 10% deflection, whichever occurs first.

6. Data ranges from 0.00 to value shown due to the level of precision of the test method.

7. Water vapor permeance decreases as thickness increases.

8. These laboratory tests are not intended to describe the hazard presented by this material under actual fire conditions.

9. Fire performance of FOAMULAR® 4" thick product only. Thicker products may have different fire performance characteristics. Due to limits on the equipment used to test per ASTM E84, Owens Corning® FOAMULAR® XPS Fabrication Billets have not been tested.

Applications

Mechanical Equipment

Above Ground

Underground

Process Piping

Sewage Pipes

Steam and Hot Water

Mechanical Solutions

Piping

eBooks and Guides

Division Guide Specification eBook

The Division Mechanical Manufacturer’s Guide eBook is an easy-to-use tool that can be accessed anytime, anywhere to view duct, pipe and HVAC equipment insulation solutions, product data sheets, CSI MasterFormat® three-part system specifications and green building program guides.

Find Our Products

CONTACT US

Even though we’re a global company, we’re always ready to answer your questions. Call to speak with an Owens Corning representative so you can start your project right away.

1-800-GET-PINK
Chat