HVAC

QuietR® Duct Liner Board

Owens Corning QuietR Duct Liner Board is a bonded board of glass fibers designed to be installed inside sheet metal ductwork or plenums with metal fasteners and adhesives. The smooth, fire-resistant airstream surface resists damage during installation and in service.

Download Brochure PDF | 2.51 MB

Owens Corning QuietR Duct Liner Board is a bonded board of glass fibers designed to be installed inside sheet metal ductwork or plenums with metal fasteners and adhesives. The smooth, fire-resistant airstream surface resists damage during installation and in service.

Download Brochure PDF | 2.51 MB

Specifications and Literature

Product Features

Sound Absorbent

Thermal Comfort

Bacterial and Fungal Growth Resistance

Technical Information

Property Test Method Value
Operating Temperature ASTM C 411 250°F (121°C)
Maximum Air Velocity UL 181 and ASTM C 1071 Erosion Test 6,000 fpm (30.5 m/s)
Water Vapor Sorption ASTM C 1104 3% by weight at 120°F (49°C), 95% R.H.
Fungi Resistance ASTM C 1338 Meets requirements
Fungi Resistance ASTM G 21 Meets requirements
Bacteria Resistance ASTM G 22 Meets requirements
Corrosiveness1 ASTM C 665 Corrosiveness Test Will not cause corrosion greater than caused by sterile cotton on aluminum or steel
Thermal conductivity
k at 75°F (λ at 24°C mean)
ASTM C 518 Btu•in/hr•ft2•°F
0.23
W/m•°C
(0.033)
Surface Burning Characteristics2
Flame Spread
Smoke Developed
ASTM E 84, NFPA 255, UL 723, and CAN ULC-S102
25
50

  1. When wet, coated surfaces of QuietR® Duct Liner Board in contact with galvanized steel may cause discoloration of the sheet metal.
  2. The surface burning characteristics of these products have been determined in accordance with UL 723, ASTM E 84, NFPA 255, and CAN/ULC-S102. These standards should be used to measure and describe the properties of materials, products or assemblies in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire risk of materials, products or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire risk assessment which takes into account all of the factors which are pertinent to an assessment of the fire hazard of a particular end use. Values are reported to the nearest 5 rating.

Applications

Duct Insulation

Find our Products

Find a Professional

CONTACT US

Even though we’re a global company, we’re always ready to answer your questions. Call to speak with an Owens Corning representative so you can start your project right away.

1-800-GET-PINK