Chopped Strand Mat


Quality Designed to Increase Productivity

M723A chopped strand mat represents an ideal solution for demanding applications requiring good surface finish and exceptional mechanical properties, in hand lay-up or closed mold processes.


Performance Attributes

Easy Handling and Moldability
High Process Efficiency
High Performance
Enhanced Service Life
  • Easy Handling and Moldability

    Very good glass bonding provides excellent dry handling characteristics and minimized fiber shedding during molding process.

  • High Process Efficiency

    Fast wetting and quick air release help reducing the labor required to roll out the part. <br> Exceptional wet tensile strength perfectly fits wet and carrying process.

  • High Performance

    Optimized product design allows good surface finish and smooth surface behind gelcoat while providing the final part with exceptional tensile and flexural performances.

  • Enhanced Service Life

    Compared to standard E-glass, Advantex® glass helps with enhanced service life in applications facing corrosion.


Boat hulls - Automotive Load Floors - RV and Truck Panels.

M723A mat is designed for hand lay-up or closed mold processes with polyester, vinyl ester and DCPD resin systems. Applications include boat hulls, automated matched metal die closed molding of automotive load floors, and lamination for RV and truck flat panels.

Boat hulls - Automotive Load Floors - RV and Truck Panels.

Technical Information


M723A is available in North America and Europe. Additional weights and widths are available upon request.

Nominal Mat Weight (g/sq.m) Nominal Mat Weight (oz./sq.ft) Roll Width (cm) Roll Width (in)
300 - 450 – 600 - 900 1.0 – 1.5 – 2.0 – 3.0 96.5 - 127 – 152.4 38 – 50 - 60

Packaging and Labeling

Each roll is wound on a 101.6mm (4”) internal diameter cardboard tube and fully enclosed in Cling-Pak™ wrap. 16 rolls are positioned vertically on each pallet, banded with tape and Cling-Pak™ wrapped for stability and protection.

Each roll bears a label detailing the product description, product code, nominal weight, roll width, roll number, and date of manufacture.

Nominal Mat Width (CM) Nominal Mat Width (IN) Roll Diameter (CM) Roll Diameter (IN) Rolls Per Pallet Pallet Size (CM) Pallet Size (IN)
96.5 - 127 - 152.4 38 - 50 - 60 28.6 11 1/4 16 114.3 x 114.3 45 x 45


Unless otherwise specified, it is recommended to store glass fiber products in a cool, dry area. Ideal conditions are at a temperature between 10°C and 35°C and a relative humidity between 35% and 85%. The glass fiber products must remain in their original packaging material until the point of usage. If the storage temperature is below 15°C, it is recommended that the product be stored in the workshop, within its original packaging, at least 24 hours prior to use to help prevent condensation. The packaging is not waterproof. Be sure to protect the product from the weather and other sources of water. When stored properly, the product can be used up to 2 years from the date of manufacture, and retesting is advised after 1 year from the initial production date to insure optimum performance.


Talk to an Expert

Ray Arai

Contact Ray