Type 30® Single-end Roving

SE1200

VERSATILITY FOR BROAD APPLICATIONS

SE1200 single-end Type 30™ roving is a compelling solution designed specifically for knitting and weaving with versatility to work well in filament winding, pultrusion, and LFTP applications.

TALK TO AN EXPERT

Performance Attributes

EXCELLENT PROCESSING
MULTIPROCESS AND MULTI-RESIN COMPATIBLE
FAST WET-OUT WITH REDUCED COST
ENHANCED SERVICE LIFE
  • Excellent Processing

    Smooth run-out from lower drag across contact points produces less fuzz, resulting in smoother parts, less clean-up, and improved machine efficiencies.

  • Multiprocess & Multi Resin Compatible

    Flexibility for use with standard weaving looms, multiaxial knitting machines, filament winding, and pultrusion.

  • Fast Wet Out With Reduced Cost

    Fast, uniform strand wet-out leads to higher glass loading and good adhesion, resulting in optimized part production speed which supports increased productivity and better-quality finished parts.

  • Enhanced Service Life

    Compared to standard E-glass, Advantex® glass provides longer service life in applications facing corrosion and possesses high fatigue properties to help qualify for wind energy.

Technical Information

Technical Characteristics (Nominal Values)

The following data was generated using production material SE1200 – 735 Tex (675 Yield).

MECHANICAL PROPERTIES SE1200 - 734 TEX (675 YIELD) STRAND TENSILES: ASTM D2343 INTERLAMINAR SHEAR STRENGTH NOL RING: ASTM D2344
STRENGTH (MPA) STRENGTH (KSI) DRY SHEAR STRENGTH (MPA) DRY SHEAR STRENGTH (PSI) SHEAR STRENGTH RETENTION 72-HR BOIL (%)
Anhydride/DER 331 Epoxy Resin 2700 395 66.3 9620 99%
Polyester F701 Resin 2570 375 73.4 10650 85%

Availability & Packaging

Yield Tex Manufacturing Region
4961 - 2480 - 1654 - 1550 100 - 200 - 300 - 320 Americas, Europe, Asia Pacific
1288 - 1210 - 1033 - 827 385 - 410 - 480 - 600
675 - 551 - 450 - 431 735 - 900 - 1100 - 1150
413 - 330 - 276 - 250 1200 - 1500 - 1800 - 200
225 - 207 - 113 - 103 - 52 2000 - 2200 - 2400 - 4400 - 9600
Rovings are available in a single-end internal-pull package. Pallets are stretch wrapped for load stability. Each doff is wrapped for protection and to aid strand runout and transfer. Pallets are available in bulk or Creel-Pak™ pallet packaging format, depending on region.

Labeling

Each individual package is labeled with information including: product name, Tex/yield, producing plant, and production date.

Storage

Unless otherwise specified, it is recommended to store glass fiber products in a cool, dry area. The glass fiber products must remain in their original packaging material until the point of usage. The product should be stored in the workshop in its original packaging for 48 hours prior to its utilization, to allow it to reach the workshop temperature condition and prevent condensation, especially during the cold season. The packaging is not waterproof. Be sure to protect the product from the weather and other sources of water.

It is recommended that the product be used for manufacturing in resin within 18 months. Ideal conditions are at a temperature between 8ºC and 26ºC and a relative humidity 70% or less.

Applications

Talk to an Expert

Patrick Haller