Skip to Main Content

Owens Corning® QuietZone® Acoustic Floor Mat is a lightweight closed cell polyethylene foam acoustic floor mat acoustically engineered to isolate sound vibrations and impact sounds within a flooring system.

QuietZone® Acoustic Floor Mat is designed to be placed between wood or concrete sub-floor and a plywood, gypsum concrete, or concrete overlayment.

QuietZone® Acoustic Floor Mat

Features

  • Absorbs impact sound vibrations
  • Retains acoustic properties over time
  • Resistant to moisture, mold and fungus
  • Lightweight rolls, easy to cut and install

Sustainability Criteria

  • Contributes to credits in green building programs such as LEED® and Green Globes. For further information see documents: LEED® v4 for Building Design and Construction and Owens Corning® Impact Study - Leadership in Energy and Environmental Design (LEED® v4).

Installation Instructions

Deliver products in their original packages, and store in enclosed shelter. Packaging is not UV resistant. Shelter unused packages from the elements.

  1. QuietZone® Acoustic Floor Mat must be installed on a clean, dry, level surface, (i.e., a standard wood subfloor or concrete surface)
  2. Roll out QuietZone® Acoustic Floor Mat across the floor and turn up the mat along each wall so that 76-102 mm (3-4") of the mat rests against the outer layer of the wall
  3. Install an overlayment made of either two staggered layers of 9.5 mm (⅜") or 13 mm (½") exterior grade plywood (glued and screwed together for stability) or 38 mm (1½") gypsum/concrete topping
  4. Make sure that there are no attachments or penetrations through the QuietZone® Acoustic Floor Mat
  5. Install finished floor
  6. Trim away excess mat and install based board or trim.

Specifications & Literature

Complete Access: All Products, All Documents, One Location. Visit our NEW Technical Resource Library.

Technical Information

Property

Value

Test Method

Physical Properties

Compressive Strength Vertical Direction: 720/1800 (psf)

ASTM D3575
Suffix D @ 25%/50%

Compression Set (50% deflection requires a loading of 1800 psf): 19% (81% recovery)

ASTM D3575
Suffix B

Nominal Density: 2.2 pcf

ASTM C303

Thermal Resistance: 1.3 R-Value (hr•ft2 °F/BTU) 

ASTM C518

Fire

Flame Spread 0; Smoke Developed 70

ASTM E-84

Moisture

Water Absorption: <0.1 (psf)

ASTM D3575

Corrosion

Steel, Aluminum, Copper - Pass

ASTM C665

Availability

Roll Length

Roll Width

Thickness

10.7 m (35')1219 mm (4')9.5 mm (⅜")

Packaged in Rolls 1219 mm (4') long x 406 mm (16") in diameter

Technical Services Available

For Canadian Technical inquiries, please contact our technical team at owenscorning.ca/contacttech.


Environmental and Sustainability

Owens Corning is a worldwide leader in building material systems, insulation, and composite solutions, delivering a broad range of high-quality products and services.

Owens Corning is committed to driving sustainability by delivering solutions, transforming markets, and enhancing lives. More information can be found at owenscorning.ca or owenscorninglibrary.ca.


Disclaimer of Liability
Technical information contained herein is furnished without charge or obligation and is given and accepted at recipient’s sole risk. Because conditions of use may vary and are beyond our control, Owens Corning makes no representation about, and is not responsible or liable for the accuracy or reliability of data associated with particular uses of any product described herein.

Notes
For additional information, refer to the Safe Use Instruction Sheet (SUIS) found in the  SDS Database via sds.owenscorning.com.

Applications

Contact Us

Even though we're a global company, we're always ready to answer your questions. Call to speak with an Owens Corning representative.