OptiSpray® F Roving represents a compelling solution for fabricators that want to save time and resin while increasing the performance of their products.
TALK TO AN EXPERT
INCREASED EFFICIENCY
REDUCED COST
GREAT PERFORMANCE
FAST WET-OUT
Low fuzz combined with easy chopping, flat lay down and uniform dispersion saves time.
Higher glass loading with optimal resin consumption reduces the amount of expensive resin required.
Good mechanical properties, great surface quality, excellent conform-ability, doesn't trap air, low spring back.
Designed to provide optimal performance for spray-up applications where fast wet-out speed is preferred; great performance in various types of part complexities.
Owens Corning also offers Technical Support, which focuses on trouble shooting and increased productivity for our customers.
The new, optional 4-high pallet design increases the amount of fiberglass material in the standard pallet footprint by 33% enabling producers to fit more pounds within a distribution center, on a truck during delivery, and in the manufacturing site with no impact to floor space.
Other Tex may be available upon request
| Linear Weight Of Roving (tex) | Yields (yds/lb) | Loss On Ignition (%) Iso 1887: 1995 |
|---|---|---|
| 2400 | 207 | 1.25 |
| 3000 | 165 | 1.25 |
Each OptiSpray™ F Roving doff is protected by a tack-wrap polythene film and identified by an individual label; please do not remove film during use.
Creel-Pak™ and customer specific packaging may be available upon request.
| Product | Doff Ø (MM) | Pallet Dimen. L X W (CM) | Layers per Pallet | Doffs per Layer | Total Number of Doffs | Creel-Pak® | Pallets Approx. Fiberglass |
|---|---|---|---|---|---|---|---|
| Number of Ends | Weight* (KG) | ||||||
| OptiSpray® F Rov. Creel Pak™ 4E 2400/3000 | 303 | 129.5 x 96.5 | 3 | 16 | 48 | 4 | 941 |
| OptiSpray® F Rov. Creel Pak™ 2E 2400/3000 | 303 | 129.5 x 96.5 | 3 | 16 | 48 | 2 | 941 |
| OptiSpray® F Rov. Close Top™ 2400/3000 | 303 | 129.5 x 96.5 | 3 | 16 | 48 | Individual Boxes | 1104 |
| Optional OptiSpray® F Rov. Creel-Pak™ 2400 | 303 | 129.5 x 96.5 | 4 | 16 | 64 | 2 | 1255 |
*Add 35-45KG to obtain gross weight.
Each doff has a self-adhesive identification label, showing the product reference and the production date.
Each pallet has five identification labels detailing the product reference, pallet net and gross weights, production date and pallet production code.
It is recommended to store glass fiber products in a cool, dry area. The glass fiber products must remain in their original packaging material until the point of usage; the product should be stored in the workshop, within its original packaging, 48 hours prior to its utilization, to allow it to reach the workshop temperature condition and prevent condensation, especially during cold season. The packaging is not waterproof. Be sure to protect the product from the weather and other sources of water. When stored properly, there is no known shelf life to the product, but retesting is advised after two years from the initial production date to insure optimum performance.
OptiSpray F is available in the Americas and Europe
PipeStrand® S1000 is designed for the low-pressure filament winding market and is compatible with UP, VE, EP and PU resins.
M6X1 chopped strand mat represents a compelling solution for large and thick part manufacturing when high productivity is required in hand lay-up or closed mold processes
Owens Corning surfacing glass Non-Wovens are designed to help flat GRP panels continuous lamination of external skins of truck body and recreational vehicle (RV) lightweight panels.
Owens Corning surfacing glass Non-Wovens key product benefits are high strength performance, hot tensile and thermal stability, helping improved dimensional stability and preventing tiles from curling and shrinking.
Product Leader, Multi-End Roving NA
Contact Matthew
