Unifilo® 500 Series continuous filament mats represent a large choice of tailored reinforcement solutions for efficient manufacture of high performance profiles by pultrusion process
TALK TO AN EXPERT
CUSTOMIZED FOR MULTIPLE NEEDS
FREEDOM OF DESIGN AND WHITE COLOR
PRODUCTIVITY AND HIGH PERFORMANCE
CORROSION RESISTANCE
U527 product easily adapts to complex die shapes and preserves part white color. <br> U528X1 product offers a great balance between softness, white color and good tensile strength requirements.
U528 product is easy to splice and enables excellent processability. It provides very good mechanical and di-electrical properties to molded parts <br> U529 product higher tensile strength fits the requirement for most challenging profiles and fast pultrusion process speed.
Excellent corrosion resistance with Advantex® Glass compared to standard E-glass: providing longer service life in applications facing corrosion.
Unifilo®500 Series mats are available with varying binder contents to match up with specific customer applications
UNIFILO®500 Series mats are compatible with unsaturated polyester, vinyl ester, acrylic and epoxy resins and designed for the reinforcement of pultruded shapes including gratings, ladder rails, frames, insulators. They are also proven to be well suited for compression molding of di-electrical laminates. (Picture Courtesy of Collodin, CN.)
Unifilo® 500 Series mats are available in Europe and Asia Pacific. U529 is available in North America.
All products are made to order. Additional widths are available upon request by your Owens Corning contact.p>
| Nominal Mat Weight (g/cm2) | Nominal Mat Weight (oz./sq.ft.) | Roll Width (cm) | Roll Width (cm) |
|---|---|---|---|
| 225 - 300 - 450 - 600 - 900 | - | 127 - 138 | - |
Each roll is wound on a 103mm internal diameter cardboard tube and wrapped with a transparent stretch film. Upon customer request, paper tube holds printed information allowing 100% traceability once roll is slit; rolls can be split into 3-40cm stripes.
| Nominal Mat Width(cm) | Roll Ø (cm) | Rolls per Pallet | Pallet Size (cm) |
|---|---|---|---|
| 3 to 40 | 55 | =>12 (to box capacity) | 4 boxes on 114x114 pallet |
| 40 to 70 | 55 | 12 | 114x114 |
| 70 to 105 | 55 | 8 | 114x114 | 105 to 210 | 55 | 4 | 114x114 | =>210 | 55 | 2 - 8 | Wooden Crate |
Each roll bears a label detailing the product description, product code, nominal weight, roll width, roll number and manufacture date.
Unless otherwise specified, it is recommended to store glass fiber products in a cool, dry area. Ideal conditions are at a temperature between 10°C and 35°C and a relative humidity between 35% and 85%. The glass fiber products must remain in their original packaging material until the point of usage. If the storage temperature is below 15°C, it is recommended that the product be stored in the workshop, within its original packaging, at least 24 hours prior to use to help prevent condensation. The packaging is not waterproof. Be sure to protect the product from the weather and other sources of water. When stored properly, the product can be used up to 2 years from the date of manufacture, and retesting is advised after 1 year from the initial production date to insure optimum performance.
Unifilo® 500 Series mats are available in Europe and Asia Pacific.
VL 9202 product especially helps constant cross-section composite pultruded profiles with easy resin wet-out, high quality, uniform surface layer, high flexibility for complex die processing, enhanced part structural strength and long-term durability.
M524 (Advantex® ECR-glass) non-wovens help with excellent corrosion resistance, smooth surfacing finish and multi-resin compatibility
M8643 continuous filament mat represents a viable solution for efficient manufacturing of high-quality continuous profiles by a pultrusion process.
Global Product Manager, CFM/CSM
Contact Ray