Roofing Resources During COVID-19For ContractorsFor Homeowners
20149
Change
VentSure®

Rigid Roll

WITH WEATHER PROTECTOR® MOISTURE BARRIER

Optimize Airflow in your Attic

Reduce heat and moisture buildup that can lead to ice damming, roof deterioration and mold infestation. Helps air flow through the attic to manage temperature and moisture.

Optimize Airflow in your Attic

Reduce heat and moisture buildup that can lead to ice damming, roof deterioration and mold infestation. Helps air flow through the attic to manage temperature and moisture.

Overview

For an efficient roofing system, it’s essential that the attic stay dry and cool. VentSure® Rigid Roll Ridge Vents with Weather PROtector® moisture barrier membrane protects against weather infiltration. Featuring a low profile, Rigid Roll uses a shingle-over construction for durability and protection.

  • Patented, durable corrugated plastic construction
  • Unique design adjusts to almost any roof pitch
When properly installed with soffit or eave vents, VentSure® Rigid Roll Ridge Vents meet or exceed requirements of all recognized national building codes. And they have passed all research and development tests** for weather infiltration:
  • Wind-driven rain – 8.8" of rain at 110 MPH**
  • Snow infiltration – snow simulation at 35 and 70 MPH**
As a key component of a VentSure® Balanced Air Ventilation System, the VentSure® Rigid Roll Ridge Vent is an essential part of the Total Protection Roofing System®^.

Download Brochure PDF | 3.1 MB

Specifications and Literature

Product Information

11.25" 9" 7" (Compton and Portland Service Area)
Net Free Vent Area 250 sq. in. per roll / 12.5 sq. in. per lin. ft. 250 sq. in. per roll / 12.5 sq. in. per lin. ft. 250 sq. in. per roll / 12.5 sq. in. per lin. ft.
Nominal Length 240" / 20 ft. 240" / 20 ft. 240" / 20 ft.
Nominal Width 11.25" 9" 7"
Nominal Height 5/8" 5/8" 5/8"
Shingle-Over Width 12" 10" 8"
Allowable Roof Pitch 2:12 to 20:12 2:12 to 20:12 2:12 to 20:12

** Testing performed at Architectural Testing Incorporated (ATI) in York, PA.

^ Excludes non–Owens Corning® roofing products such as flashing, fasteners and wood decking.


LEED® is a registered trademark of U.S. Green Building Council.

Ventilation Requirements

In order to create a consistent flow of cool, dry air through your attic, you need to make sure the air has a way to come in and go out: intake and exhaust. It’s important there is a balance between the intake and exhaust ventilation to help ensure air flows smoothly and efficiently.

Applicable Standards & Approvals

  • ICC-ESR 2664
  • ICC-ES AC132
  • FBC - TAS100(A) Wind-Driven Rain up to 110 MPH
  • TDI Approved For Use in Windstorm Catastrophe Areas
  • Florida Product Approval
  • Miami-Dade Product Approval
  • PRI ER 1378E03

Total Protection Roofing System®

Total Protection is more than shingle deep

It takes more than shingles to protect your home. It takes an integrated system of components and layers designed to help perform in three critical areas.

  • SEAL Helps create a water-proof barrier
  • DEFEND Helps protect against nature's elements
  • BREATHE For balanced attic ventilation

^ Excludes non-Owens Corning® roofing products such as flashing, fasteners and wood decking

Find a Contractor

Get Started

Find our Products

Retail Stores
Distributors

Find a Professional

Owens Corning Expert
Roofing Contractors

CONTACT US

Even though we’re a global company, we’re always ready to answer your questions. Call to speak with an Owens Corning representative so you can start your project right away.

1-800-GET-PINK®
Chat