ProEdge®

HIP & RIDGE SHINGLES

Helps Protect Against Nature's Elements

Add a tough, yet beautiful layer of defense with strong adhesion that resists blow offs and helps protect the most vulnerable areas such as hips & ridges.

Helps Protect Against Nature's Elements

Add a tough, yet beautiful layer of defense with strong adhesion that resists blow offs and helps protect the most vulnerable areas such as hips & ridges.

Overview

Attention to detail matters. ProEdge® Hip & Ridge Shingles provide a clean and consistent look. Their enhanced aesthetics add distinction to your roof line.

  • Added shadow line provides strong distinction along ridge line and enhances overall aesthetics
  • Increased exposure allows for quick installation
  • Color-matched to coordinate with Owens Corning® laminate shingle lines
  • Perforated for easy separation. No additional on-site cutting required
  • Pre-applied continuous sealant bead aids in quick adhesion
  • Limited Lifetime* Warranty when installed with the Owens Corning® Laminate Shingles
  • Algae Resistant†
Part of the Owens Corning® Total Protection Roofing System®^.

Download Brochure PDF | 1.83 MB

Specifications and Literature

Resources

Product Information

Product Information

Portland All available PSAs
Nominal Size 13-1/4" x 39-1/8" 12" x 36"
Piece size 13-1/4" x 9-27/32" 12" x 12"
Exposure 6-5/8" 6"
Pieces per Carton 19 22
Pieces per Shingle/Bundle 4/76 3/66
Lineal Feet per Carton 41.95ft. 33.3ft.

1. Includes core weight

2. All values are approximate.

3. Limited to single layer applications above 650°F (343°C), but not greater than 6" (152mm) thickness.

4. With heat up schedule.

5. The surface burning characteristics of these products have been determined in accordance with UL 723, ASTM E84 or CAN/ULC-S102. Values are reported to the nearest 5 rating.

6. Preproduction qualification testing

7. It is critical to have the right amount of intake ventilation and to adequately seal the attic floor to prevent pulling air from conditioned space.

8. For each Gable Mount fan, Owens Corning Roofing requires 890 square inches of intake. See instructions for details.

9. For each Roof Mount fan, Owens Corning Roofing requires 600 square inches of intake. See instructions for details.

10. The surface burning characteristics of these products have been determined in accordance with UL 723, ASTM E84 or CAN/ULC-S102. This standard should be used to measure and describe the properties of materials, products or assemblies in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire risk of materials, products or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire risk assessment which takes into account all of the factors which are pertinent to an assessment of the fire hazard of a particular end use. Values are reported to the nearest 5 rating.

11. Preproduction qualification testing complete and on file. Chemical analysis of each production lot required for total conformance.

* See actual warranty for details, limitations and requirements

† Subject to regional availability

^ Excludes non–Owens Corning™ roofing products such as flashing, fasteners and wood decking.

Applicable Standards & Approvals

  • ASTM D228
  • ASTM D3018, Type I
  • ASTM D3161, Class F Wind Resistance
  • ASTM D3462
  • UL ER2453-01
  • ASTM E108/UL 790, Class A Fire Resistance
  • ICC-ES AC438
  • Florida Product Approval
  • Miami-Dade Product Approval
  • CSA A123.5

Total Protection Roofing System®

Total Protection is more than shingle deep

It takes more than shingles to protect your home. It takes an integrated system of components and layers designed to help perform in three critical areas.

  • Seal Helps create a water-proof barrier
  • Defend Helps protect against nature's elements
  • Breathe For balanced attic ventilation

^ Excludes non-Owens Corning® roofing products such as flashing, fasteners and wood decking

CONTACT US

Even though we’re a global company, we’re always ready to answer your questions. Call to speak with an Owens Corning representative so you can start your project right away.

1-800-GET-PINK