Skip to main content
20149
Change

WOOD STUD WALL Masonry Veneer Mineral Wool CI with Fluid or Sheet AWB

Overview

This Enclosure Solutions Wall System includes a Wood Stud structure with masonry veneer and mineral wool continuous insulation with fluid or sheet applied air and water resistive barrier. Complies with ASTM E2357 (air) and ASTM E331 (water).

Get all the construction documentation you'll need, in a single click:

Products in this Solution

Additional Products

Sold Separately

Performance Attributes

Key Attributes:

Durability
Easy Installation
Recycled Materials
Thermal Comfort

ASHRAE 90.1 Compliant

ASHRAE Standard 90.1 requires Continuous Insulation (CI) be used for all commercial and some residential buildings in the United States. Continuous insulation is defined in 90.1 as “insulation that is continuous across all structural members without thermal bridges other than fasteners and service openings. It is installed on the interior, exterior, or is integral to any opaque surface of the building envelope”.

Learn More

ASTM E2307

ASTM E2307 measures the ability of perimeter fire barrier systems to maintain a seal and prevent interior fire spread as the exterior wall assembly deflects and deforms during fire exposure. The ASTM E2307 test exposes the joint to fire from the room of fire origin and the exterior wall to fire from both the interior and the exterior as the fire plume exits the room of fire origin through a window opening. ASTM E 2307 determines the period of time that the perimeter fire containment system will limit flame penetration through the opening between the exterior wall assembly and the floor assembly.

Learn More

Additional Attributes and Compliance

This wall assembly enclosure also meets the following codes and standards. Click a standard to learn more

CONTACT US

Even though we’re a global company, we’re always ready to answer your questions. Call to speak with an Owens Corning representative so you can start your project right away.

1-800-GET-PINK®