SSL II® with ASJ Max Fiberglas™ Pipe Insulation

Pipe Insulation for Mechanical Solutions
Pipe insulation that withstands below to above ambient temperatures

Molded out of heavy-density resin-bonded inorganic glass fibers, Owens Corning® SSL II® with ASJ Max Fiberglas™ Pipe Insulation is designed to withstand temperatures from 0F to 1000F, making it an outstanding option as thermal insulation for hot and cold service piping. Available in 36”-long (914mm), hinged sections with a self-sealing lap all-service jacketing, this fiberglass pipe insulation is tailored to fit for copper, iron, and PVC pipe applications.

Download HVAC Piping Guide Spec

Download Plumbing Piping Guide Spec

Warning: This video contains flashing images that could trigger seizures for people with photo sensitivity.

Specifications & Literature

Certifications

Performance Attributes

Durability

Easy Installation

Mold and Mildew Resistance

Resources

How to Fillet Rigid and Flex Core Insulation: SSL II® with ASJ Max Fiberglas™ Pipe Insulation

Insulate: SSL II® with ASJ Max Fiberglas™ Pipe Insulation

Seal – Protect – Insulate: SSL II® with ASJ Max Fiberglas™ Pipe Insulation

Product Focus: SSL II® with ASJ Max Fiberglas™ Pipe Insulation

SSL II® with ASJ Max Fiberglas™ Flex Core Pipe Insulation

No Fillet Required: Owens Corning SSL II® with ASJ Max Fiberglas™ Pipe Insulation

How to Insulate a Tee Fitting: Owens Corning SSL II® with ASJ Max Fiberglas™ Pipe Insulation

Positive Closure System: Owens Corning SSL II® with ASJ Max Fiberglas™ Pipe Insulation

How to Install around Valves: Owens Corning SSL II® with ASJ Max Fiberglas™ Pipe Insulation

Technical Information

PHYSICAL PROPERTIES

PROPERTY	TEST METHOD	VALUE
Density (size dependent)	ASTM C302	3.5 to 5.5 pcf
Operating Temperature Range¹	ASTM C411	0°F to 1,000°F(-18^oC to 538°C)
Water Vapor Sorption	ASTM C1104	Less than 5% by weight
Corrosion to Steel	ASTM C1617	Meets Requirements
Jacket Temperature Limitation	ASTM C1136	-20°F to 150°F (-29°C to 66°C)
Jacket Permeance	ASTM E96, Proc. A	0.01 perm
Burst Strength, min	ASTM D774/D774M	100 psi
Composite Surface Burning Characteristics²	UL 723, ASTM E84 or CAN/ULC-S102	Flame Spread 25 Smoke Developed 50

¹With heat-up schedule when operating temperatures between 850°F - 1000°F.

²The surface burning characterisitcs of these products have been determined in accordance with UL 723, ASTM E84, and CAN/ULC - S102. Values are reported to the nearest 5 rating.

Standards Codes Compliance

ASTM C547, Mineral Fiber Pipe Insulation, Types I, Grade A
ASTM C585, Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing
ASTM C1136, Flexible Low Permeance Vapor Retarders for Thermal Insulation: Types I, II, III, IV
UL Labeled for Flame Spread Index of 25 or less and Smoke Developed Index of 50 and is fully building code compliant
UL Listed and Labeled for use over OVC and other polymer pipes UL Category BSMPASTM C795, Thermal Insulation for Use in Contact with Austenitic Stainless Steel³
Nuclear Regulatory Commission Guide 1.36, Non-Metallic Thermal Insulation³
MIL-PRF-22344E, Insulation, Pipe, Thermal, Fibrous Glass
MIL-DTL-24244D (Ships) Insulation Material with Special Corrosion, Chloride, and Fluoride Requirements3
NFPA 90A and 90B

³Preproduction qualification testing complete and on file. Chemical analysis of each production lot required for total conformance. Certification needs to be specified at time of order.

Applications

Contact Us

Even though we're a global company, we're always ready to answer your questions. Call to speak with an Owens Corning representative.

1-800-GET-PINK®

Call Us