XPS Insulation

FOAMULAR® PROPINK® IS

Owens Corning FOAMULAR PROPINK IS is an extruded polystyrene (XPS) insulation board with a reinforced skin laminated on both sides for flexibility and extra damage control on the job-site.

FOAMULAR® PROPINK® Insulating Sheathing Data Sheet PDF | 1.27 MB

Owens Corning FOAMULAR PROPINK IS is an extruded polystyrene (XPS) insulation board with a reinforced skin laminated on both sides for flexibility and extra damage control on the job-site.

FOAMULAR® PROPINK® Insulating Sheathing Data Sheet PDF?V=1531889239000 | 1.27 MB

Specifications and Literature

More Than Insulation. We Offer Solutions

Enclosure Solutions for Walls, Foundations and Roofs

Owens Corning® Enclosure Solutions deliver a range of options for commercial walls, roofs and below-grade foundations - all with customizable components to fit your project, and all backed by the experts at Owens Corning.

Find a Solution

Product Features

Moisture Management

Exceptional moisture resistance

Durability

Easy Installation

Certifications

Resources

Technical Information

Property1Test Method2Value
Thermal Resistance3, R-Value (180 day) minimum,
hr·ft2·°F/Btu (RSI, °C·m2/W)
@ 75°F (24°C) mean temperature
ASTM C518 
½" Thickness 3.0 (0.53)
¾" Thickness 4.0 (0.70)
1" Thickness 5.0 (0.88)
@ 40°F (4.4°C) mean temperature
½" Thickness 3.2 (0.57)
¾" Thickness 4.3 (0.76)
1" Thickness 5.4 (0.95)
Long Term Thermal Resistance, LTTR-Value3, minimum
hr·ft2·°F/Btu (RSI, °C·2/W)
@ 75°F (24°C) mean temperature
CAN/ULC S770-03 
½" Thickness N/A
¾" Thickness N/A
1" Thickness 5.0 (0.88)
Compressive Strength4, minimum psi (kPa)ASTM D162115 (103)
Flexural Strength5, minimum psi (kPa)ASTM C20375 (517)
½" Thickness 100 (690)
¾" Thickness 85 (586)
1" Thickness 65 (448)
Water Absorption6, maximum % by volumeASTM C2720.10
Water Vapor Permeance7, maximum perm (ng/Pa·s·m2)ASTM E960.2 (11.5)
Dimensional Stability, maximum % linear changeASTM D21262.0
Flame Spread8, 9ASTM E8430
Smoke Developed8, 9, 10ASTM E8475
Oxygen Index8, minimum % by volumeASTM D286324
Service Temperature, maximum °F (°C) 165 (74)
Linear Coefficient of Thermal Expansion, in/in/°F (m/m°C)ASTM E2283.5 x 10-5 (6.3 x 10-5)
  1. Properties shown are representative values for 1" thick material, unless otherwise specified.
  2. Modified as required to meet ASTM C578
  3. R means the resistance to heat flow; the higher the value, the greater the insulation power. This insulation must be installed properly to get the marked R-value. Follow the manufacturer’s instructions carefully. If a manufacturer’s fact sheet is not provided with the material shipment, request this and review it carefully. R-values vary depending on many factors including the mean temperature at which the test is conducted, and the age of the sample at the time of testing. Because rigid foam plastic insulation products are not all aged in accordance with the same standards, it is useful to publish comparison R-value data. The R-value for FOAMULAR® XPS Insulation is provided from testing at two mean temperatures, 40ºF and 75ºF, and from two aging (conditioning) techniques, 180 day realtime aged (as mandated by ASTM C578) and a method of accelerated aging sometimes called “Long Term Thermal Resistance” (LTTR) per CAN/ULC S770-03. The R-value at 180 day real-time age and 75ºF mean temperature is commonly used to compare products and is the value printed on the product.
  4. Values at yield or 10% deflection, whichever occurs first.
  5. Value at yield or 5%, whichever occurs first.
  6. Data ranges from 0.00 to value shown due to the level of precision of the test method.
  7. Water vapor permeance decreases as thickness increases.
  8. These laboratory tests are not intended to describe the hazards presented by this material under actual fire conditions.
  9. Data from Underwriters Laboratories Inc.® classified. See Classification Certificate U-197.
  10. ASTM E84 is thickness-dependent, therefore a range of values is given.

 

 

 

Applicable Standards

  • Energy Star
  • UL Greenguard Gold
  • UL Greenguard EPD
  • SCS Recycled Content - Average 20%
  • Energy Star

Applications

Walls

eBooks and Guides

Division 7 eBook

The Division 7 Thermal & Moisture Protection eBook is an easy-to-use tool that provides quick access to valuable Division 7 materials including product data sheets, 3-part system specifications, ICC-ES Code Reports and more.

Find Our Products

CONTACT US

Even though we’re a global company, we’re always ready to answer your questions. Call to speak with an Owens Corning representative so you can start your project right away.

1-800-GET-PINK
Chat