No-Wrap Fiberglas™ Pipe Insulation

Owens Corning® No-Wrap Fiberglas™ Pipe Insulation is molded of heavy density resin bonded inorganic glass fibers that come in one-piece, 36" (914mm) long, hinged sections. The insulation is tailored to fit for copper, iron, PVC, and other polymer pipe applications.

Fiberglas Pipe Insulation Portfolio Brochure PDF | 3.75 MB

Owens Corning® No-Wrap Fiberglas™ Pipe Insulation is molded of heavy density resin bonded inorganic glass fibers that come in one-piece, 36" (914mm) long, hinged sections. The insulation is tailored to fit for copper, iron, PVC, and other polymer pipe applications.

Fiberglas Pipe Insulation Portfolio Brochure PDF?V=1557935400000 | 3.75 MB

Specifications and Literature

Product Features

Easy Installation

Technical Information

Physical Properties

PropertyTest MethodValue
Density (size dependent)ASTM C3023.5 to 5.5 pcf
Operating Temperature Range1ASTM C4110oF to 1,000oF (-18oC to 538oC)
Water Vapor SorptionASTM C1104Less than 5% by weight
CorrosionASTM C665Pass - steel, copper, or aluminum
CorrosionASTM C1617

Pass - steel

Surface Burning Characteristics2UL 723, ASTM E84 or CAN/ULC-S102Flame Spread 0
Smoke Developed 0

 

Standards, Codes Compliance

  • ASTM C547, Mineral Fiber Pipe Insulation, Types I, Grade A; and Type IV, Grade B
  • ASTM C585, Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing
  • ASTM C795, Thermal Insulation for Use in Contact with Austenitic Stainless Steel 3
  • Nuclear Regulatory Commission Guide 1.36, Non-Metallic Thermal Insulation 3
  • MIL-PRF-22344E, Insulation, Pipe, Thermal, Fibrous Glass
  • MIL-DTL-32585, Type I, Form 4, Facing A
  • MIL-DTL-24244D (Ships) Insulation Material with Special Corrosion, Chloride, and Fluoride Requirements 3
  • US Coast Guard 164.109/70/0 Non-Combustible
  • NFPA 90A and 90B

 

1. With heat-up schedule. when operating temperatures are between 850oF and 1,000oF.

2. The surface burning characteristics of these products have been determined in accordance with UL 723, ASTM E84 or CAN/ULC-S102. Values are reported to the nearest 5 rating.

3. Preproduction qualification testing complete and on file. Chemical analysis of each production lot required for total conformance. Certification needs to be specified at time of order.

Applications

Mechanical Solutions

Mechanical Room

Piping

Flatwork

eBooks and Guides

Division 22/23 eBook

The Division 22/23 Mechanical Manufacturer’s Guide eBook is an easy-to-use tool that can be accessed anytime, anywhere to view duct, pipe and HVAC equipment insulation solutions, product data sheets, CSI MasterFormat® three-part system specifications and green building program guides.

Find Our Products

CONTACT US

Even though we’re a global company, we’re always ready to answer your questions. Call to speak with an Owens Corning representative so you can start your project right away.

1-800-GET-PINK