Owens Corning® Fiberglas™ Pipe and Tank Insulation is made of semi-rigid fibrous glass board material, factory-jacketed with an FRK or ASJ Max jacket.
Pipe and Mechanical Insulation Brochure PDF?V=1608634819000 | 8.07 MBOwens Corning® Fiberglas™ Pipe and Tank Insulation is made of semi-rigid fibrous glass board material, factory-jacketed with an FRK or ASJ Max jacket.
Pipe and Mechanical Insulation Brochure PDF | 8.07 MBOwens Corning® Fiberglas™ Pipe and Tank Insulation is made of semi-rigid fibrous glass board material, factory-jacketed with an FRK or ASJ Max jacket.
Pipe and Mechanical Insulation Brochure PDF?V=1608634819000 | 8.07 MBProperty | Test Method | Value |
---|---|---|
Pipe or equipment operating temperature range 1 | ASTM C411 | 0 to 650 °F (-18 °C to 343 °C) |
Insulation jacket temperature limitation | ASTM C1136 | -20 °F to 150 °F (-29 °C to 66 °C) |
Jacket Permeance | ASTM E96, Proc. A | 0.02 perm |
Burst Strength, min. | ASTM D774/D774M | 100 psi |
Compressive Strength at 10% Deformation | ASTM C165 | 125 lb/ft4 (5985 Pa) minimum |
Composite Surface Burning Characteristics Flame Spread Smoke Developed 2 |
25 50 |
1. Limited to single layer application.
2. The surface burning characteristics of these products have been determined in accordance with ASTM E84. This standard should be used to measure and describe the properties of materials, products or assemblies in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire risk of materials, products or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire risk assessment which takes into account all of the factors which are pertinent to an assessment of the fire hazard of a particular end use. Values are reported to the nearest 5 rating.
3. Preproduction qualification testing complete and on file. Chemical analysis of each production lot required for total conformance.
The Division Mechanical Manufacturer’s Guide eBook is an easy-to-use tool that can be accessed anytime, anywhere to view duct, pipe and HVAC equipment insulation solutions, product data sheets, CSI MasterFormat® three-part system specifications and green building program guides.
Owens Corning is proud to partner with 3E Plus® to deliver answers about using our insulation products in your business applications.
You can also download the 3E Plus® User Guide for any questions.
Even though we’re a global company, we’re always ready to answer your questions. Call to speak with an Owens Corning representative so you can start your project right away.
1-800-GET-PINK